Home Page
PVCu Windows
Sash Windows
Secondary Glaze
Specifications
Contact Us
 
 
 
Home >> Windows >> Specifications  
 



Casement Windows - White Profile

  • Joints - All hot blade welded, and grooved.
  • Reinforcement - All transoms and mullions over 800mm, sashes and vents over 800mm. Outer frame only when specified.
  • Glazing Sizes - Flat bead 24mm, Co-ex scalloped bead 20mm, No Co-ex scalloped bead 24mm.
  • Outer Frame (square section) - Standard 54mm, available in 69mm or 79mm.
  • Transom/Mullion - Standard 74mm, available in 89mm or 110mm (T only).
  • Beading - External Co-ex externally fitted, factory fitted firtree. Internal Co-ex internally fitted, factory fitted firtree.
  • Fittings - White push button to open handles operating espagnolette rod as standard. Right hand handles fitted to all top hung handles unless otherwise specified.
  • Drainage - Face or Base.
  • Glazing - All products delivered unglazed, but with glazing gaskets and wedge for on site glazing. (Black as standard)
  • Bevelled Frame - Non standard.

Casement Windows - Woodgrain Profile
  • Joints - All hot blade welded, and Knifed.
  • Reinforcement - Fully reinforced.
  • Glazing Sizes - Flat bead 24mm, scalloped bead not available.
  • Outer Frame (square section) - Standard 54mm 69mm or 79mm available Odd leg available 74mm.
  • Transom/Mullion - Standard 74mm, available in 89mm or 110mm ('T'only). Odd leg available.
  • Beading - External Co-ex externally fitted, factory fitted firtree. Internal Co-ex internally fitted, factory fitted firtree.
  • Fittings - Gold push button to open handles operating espagnolette rod as standard. Right hand handles fitted to all top hung handles unless otherwise specified.
  • Drainage - Face or Base.
  • Glazing - All products delivered unglazed, but with glazing gaskets and wedge for on site glazing.(Black as standard)
  • Bevelled Frame - Non standard.

Rehau Extras

External Window Cill (including end caps) Welding
Bay Poles Square Post Frame Extensions
Connectors Reinforcement (Steel) Head Drip
Handles Bevelled Outer Frame Scalloped Bead
White Gasket Escape/easy clean hinges High Security Hinges
Restrictor Hinge Trimvents (factory fitted) Shootbolts
Transom FalseTransom/Mullion Child Restrictors

Note: 110mm will not weld into slim outer frame, therefore, if specifying 110mm transom, then 69mm or 79mm outer frames must be specified.


Glass
  • Float - Toughened - Laminated - Obscure
  • White Georgian internal profile
  • White single Georgian bar
  • Brown Georgian internal profile
  • Brown single Georgian bar Diamond/square lead
  • Pvc-u panels

Frame dimension limitations

Top hung - Maximum width 1250mm maximum height 1250mm
Side hung - Maximum width 650mm maximum height 1250mm
Tilt & turn - Minimum width 424mm, maximum width 1694mm
  - Minimum height 604mm, maximum height 2504mm

Width should not exceed 1.5 times the height.


 
Copyright © 1st Double Glazing - All Rights Reserved